Advertisement
8
ENGLISH
3
Insert the small plug into the socket on the sweeper base (fig. 3).
◗
You can also charge the appliance by inserting the small plug into
the charging base and putting the appliance on the charging base.
4
Insert the adapter into a wall socket.
Preparing for use
1
Connect the upper handle to the telescopic part of the stick.
2
Connect the telescopic part of the stick to the bottom part of
the stick ('click') (fig. 4).
3
Connect the stick to the lower handle of the sweeper base
('click') (fig. 5).
◗
You can disconnect the stick by pressing the button on the lower
handle (fig. 6).
◗
You can also use the sweeper as a handheld appliance by
removing the stick and holding the sweeper by the lower handle
(fig. 7).
For better gripping, push the handle towards the front of the appliance
until it is at a 45-degree angle to the base ('click').
Using the appliance
1
To unlock the stick from its storage position, put your foot on
top of the sweeper base to prevent it from tilting and pull the
handle towards you ('click') (fig. 8).
Be careful not to put your foot on the on/off button or the dirt tray
release button.
2
Press the on/off button to switch the appliance on (fig. 9).
To switch the appliance off, press the on/off button again.
3
To adjust the length of the stick during use, press the slide on the
telescopic part while moving the top or bottom part of the stick
upwards or downwards (fig. 10).
Advertisement
