Mamas & Papas Bubble bouncing cradle Instructions Manual page 6

using the viBration unit
inserting/changing
the batteries.
Place the vibration
unit upside down
and remove the
screw holding the
battery cover in place
using a small cross-
head screwdriver.
Insert two type
"aa" batteries as
shown in the battery
compartment.
Ensure the batteries
are correctly inserted.
Incorrectly fitted
batteries may damage
the unit. Refit the
battery cover.
operating the
vibration unit.
Turn the dial clockwise
to start the unit. The
further clockwise
the dial is turned
the stronger the
sensation. Turn the
dial anti-clockwise
to turn the vibration
down and off.
note: It may be
necessary to increase
the strength of the
vibration as your
child grows or with
fluctuations in the
battery power.
- 6 -
Bubble Cradle V1.indd 6 8/6/07 14:24:55