Table of Contents
Advertisement
a: Slot the ends of
the legs into the holes
in the ends of the leg
connector.
B: Slot the backrest
frame through the
mouldings on the seat
frame as shown in
the diagram. Fasten
the mouldings to the
backrest frame using
the two frame screws.
c: Slot the ends of the
backrest frame onto
the top of the legs.
d: Slot the vibration
unit into the slot in
seat section of the
front of the backrest
frame.
Bubble Cradle V1.indd 3
assemBling the frame
a
B
c
d
- 3 -
8/6/07 14:24:52
Advertisement
Table of Contents
