Information On Disk Control Program Load Modules, Dump - IBM 3720 Problem Determination Manual

Information on the Disk Control
Program Load Modules Dump
If you need information on the disk control program load modules or dump,
perform the procedure below.
1
Power on and log on the operator console. Logon procedures are
documented in
3720/3721 Communication Controller Operator's Guide.
EJ
To position the cursor.
2000{{SBIl}
To select the Disk IPL information
function.
QJ8TOtER ID: 37:10-1 SERIAL. . . . . . :
FUNCTION ON 8CMEN: MatIIE LVI. TAILE
8't'S1Itt
INPUT AREA CSIA) -
T: TERIIINATE OFF: LOGOFF PFl: MOVE TO 81A PF2:
CQI
FNCTN PF3: AURIt
CP RUNNING:
DI. canENTS:
LOAD
tIIIII.I.E8:
AUTO ....
IL.OAD:
ACTIVE LOAD IIIDULE:
.........
.........
(~~:*:.)
......... (lIN)
IN fIIlCIGII!S8)
......... (~~:*:.)
va .........
PF4: CHANCE AUTO .... 1l.OAD OPTION
Use the Disk IPL Information function to:
PFI!I:
PUReE ....
• Display the status of control program load modules and dump, as well
as the automatic dump/load option setting on the MOSS disk
• Change the automatic dump/load option setting
• Purge the control program dump file.
Note: The Automatic dump/load feature is also refered to as Automatic
IPL/Dump. Refer to
3720/3721 C0m.munication Controller
Extended Services
for more information.
Information on the Disk Program Load Modules, Dump
5-11