What You Need To Begin; Record Configuration Information - SonicWALL Email Security 7.0 8000 Getting Started Manual

What You Need to Begin

A computer to use as a management station for initial configuration of SonicWALL Email
Security software
Internet Explorer 5.0 or higher
An Internet connection

Record Configuration Information

Before continuing, record the following configuration information for your reference:
Registration Information
Serial Number:
(xxxxxx-xxxxxx)
Authentication Code:
(xxx-xxx)
Networking Information\
Email Security IP Address:
Email Security Subnet Mask:
Gateway IP Address:
DNS Server 1:
DNS Server 2 (optional):
Host Name:
Page 4 Getting Started Guide 7.0
Record the serial number found on
the top right access panel of your
SonicWALL Email Security appli-
ance.
Record the authentication code
found on the top right access panel
of your SonicWALL Email Security
appliance.
Select a free static IP address for
your
SonicWALL Email Security appli-
ance that is within the range of your
local subnet.
Enter the subnet mask for the local
subnet where you are installing
your SonicWALL Email Security
appliance.
Record the IP address of your net-
work's
gateway device (such as your
perimeter
firewall/router).
Record your DNS Server informa-
tion.
Record the fully qualified domain
name within your network for your
SonicWALL Email Security appli-
ance (maximum 32 characters).