Core1553 Development Kit - Actel Core1553 User Manual

Core1553 Development Kit Hardware

Core1553 Development Kit

The Core1553 Development Kit includes the Fusion Advanced Development Kit board and the
Core1553 Daughter Card. This section describes the board components briefly. The CD contains the
board schematic and other required files.
Fusion Advanced Development Kit Board Description
The Fusion Advanced Development Kit
management platform, using Actel Fusion
TM
Cortex -M1 embedded processor on a Fusion device in the FGG484 package. The evaluation
board includes the following:
• Ethernet and USB-to-UART interface for communication with the Fusion FPGA
• SRAM, parallel flash, and SPI flash
2
• I C interface, organic light-emitting diode (OLED)
• Temperature diode, potentiometer, and pulse-width modulation (PWM) circuit
• Mixed-signal header for several daughter boards to be attached for extended mixed-signal
applications
• Programming stick header so the low-cost programming stick (LCPS) can be attached to the
board for programming
Potentiometer
DirectC Header
Main Power
Main 9 V Jack
I2C Header
USB/UART
Battery Area
Connector
DIP Switches
Oscillator
Oscillator
Figure 1-2 • Fusion Advanced Development Kit
1 0
Navigation-Style OLED
Push Switches Display
LEDs
Switch
Ethernet
50 MHz
32 KHz
MPM MPM 9 V MPM
Power Jack Area
Switch
(Figure 1-2) provides a low-cost board for the system
®
FPGA. The evaluation board supports an ARM
SPI Flash Legacy SRAM/Flash
Memory Connector Memory
Internet Voltage Gate Current Push-
Regulator Driver Sensor Button
PUB
®
RealView
Header
Interface
Header
Push-Button
Reset
Power
M1AFS1500-
FGG484
Programming
Header
Temperature
Diode
Mixed-Signal
Header