Digital Watchdog D2372TIR Series Instruction Manual page 10

CAMERA SETTING FOR SIDE OSD CONTROL BOARD
D2372TIR
2'nd Video 2'nd Video
VR VR
Omni Focus Lens Omni Focus Lens
(Zoom in/Zoom out) (Zoom in/Zoom out)
Joy Stick Key Joy Stick Key
ID Number ID Number
(1) Adjusting level volume (VR)
If the entire image is too dark or bright, or the backlight compensation is not correct
even after LENS is set to "DC", you need to adjust the level volume.
CCW (Low) Close the lens iris, making the entire image darker
CW(High) Open the lens iris, making the entire image brighter
(2) Second Video Out Connector (2'ND VIDEO)
If installer uses a portable monitor, this connector should be connected.
(3) Omni Focus Lens
The focus is always set correctly during the change of angle of view.
The lens focal length goes to max 8.5mm
Zoom In
The lens focal length goes to max 2.9mm
Zoom out
(4) ID number
(※1,2,4,8(BCD code) means ID number, and ID contains 10 numbers from 0 to 9.)