tams elektronik EasySound mini Manual page 17

EasySound mini

Connecting a reed contact:
Fig. 2: Connection of reed contacts to the switching inputs
Connection 1 of the reed contact
Connection 2 of the reed contact

Connecting a Hall sensor:
Fig. 3: Connection of Hall sensors to the switching inputs
Output of the Hall-Sensor
Ground connector of the Hall-
Sensors
Voltage supply of the Hall sensor X10
X1 | X2
X9
When connecting the Hall
X1 | X2
sensor check the polarity.
X9
When interchanging the
ground connector and the
connector for the voltage
supply, the Hall sensor may be
damaged.
English
Page 17