Table of Contents
Advertisement
English
Breaking the playback
It is possible to stop the playback of a sound file with the replay mode
"endless" by switching the assigned function to "off". With the other
replay modes it is not possible to stop the playback by using a digital
switching command.
In order to stop the playback of the active sound file with any replay
mode, the switching input #2 has to be connected to ground. In order
to establish the ground you can
connect the switching input #2 to a function output of the decoder.
As soon as the function is switched on, the active sound file will be
stopped. The function has to be switched off before playing a sound
file anew.
release an external contact. This version allows to stop the playback
automatically. For this purpose you can use reed contacts or Hall
sensors in combination with permanent magnets in the track for
example.
Page 12
EasySound mini
Advertisement
Table of Contents
