Challenger SMART FORCE Quick Manual

Download this manual

Enlarged version

SmartForce

Quick Guide

Package Content

1 x Gateway

1 x PIR Motion

Detector

1 x Outdoor Solar Sensor

Gateway Installation

1. Choose a suitable location for the Gateway, e.g. living room.

2. Connect internet cable from your router to one of the ports on the Gateway, as shown below.

3. Plug the DC adaptor to the Gateway to power it on.

adaptor

1 x Magnetic

1 x Keyfob

Contact Detector

Router

4. Wait until the Internet LED on the gateway turns green (this may take some time).

Create a new account at

https://smartforce.myluxhome.com/

1. Click on "Create a new account"

2. Enter the required information and click "Submit".

Need help?

Do you have a question about the SMART FORCE and is the answer not in the manual?

Page 1 4. Wait until the Internet LED on the gateway turns green (this may take some time). SmartForce Quick Guide Package Content 1 x Gateway Register the Gateway via PC Create a new account at https://smartforce.myluxhome.com/ 1. Click on “Create a new account” 1 x PIR Motion 1 x Magnetic 1 x Keyfob...
Page 2 3. Enter the Access code. It is printed on the label at the back of the Gateway. Click “Next step” when finished. Device Installation The devices supplied in the kit HAVE already been learnt to the Gateway Hub and do not require learning to the ASFK1 Gateway Hub.
Page 3 Adding Additional Devices (that are not supplied in the kit) 1. Log into the system screen. 4. Select the location to mount the devices. 2. Select “System”. 3. Select “Add a New Device”. 4. Select appropriate device. Challenger_Smart_Force_Quick_Set_Up_Guide_Rev01...
Page 4 Errors and omissions excepted. These instructions have been carefully checked prior to publication. However, no responsibility can be The gateway will periodically check internet connections. Try restarting the gateway if a problem occurs. accepted by Challenger for any misinterpretation of these instructions. The gateway uses DHCP to get its IP.