IDEAL EVOMAX 2 30 Installation And Servicing page 46

Tank Sensor. If the DHW has a Tank
Sensor connected then select 'Yes' from
the list. Otherwise set to 'None'.
Tank Sensor?
None
Yes
Tank Sensor?
None
Yes
SL2 input function: The SL2 input can be
configured to act as an enable, in the case
of a tank thermostat with the internal timer,
or as an override switch/tank thermostat
with external timer. By default the SL2
input must be wired via a safety thermostat
and isolating valve on a pressurised DHW
tank, and must always be present for the
DHW tank charge to operate.
Configure SL2
None
DHW enable
DHW override
OpenTherm Input Function. The
OpenTherm interface can be configured as
a DHW circuit control function, if this is not
required, select 'None'.
Configure OpenTherm
None
Temperature demand
Configure OpenTherm
None
Temperature demand
Internal timeclock. A timeclock can be
set for the DHW circuit, this will control
all functions. It can be set as a single or
multiple day timer.
Use an internal timeclock
No
Yes
Use an internal timeclock
No
Yes
46
SECTION 2 - INSTALLATION
Single day timer is programmable for
each of the 7 days with 3 periods per day,
Monday through Sunday:
Time clock
Single
Multiple
Single
Monday
Period 1 06:00-22:00
Period 2 00:00-00:00
Period 3 00:00-00:00 Done
Single
Tuesday
Period 1 06:00-22:00
Period 2 00:00-00:00
Period 3 00:00-00:00 Done
Single
Wednesday
Period 1 06:00-22:00
Period 2 00:00-00:00
Period 3 00:00-00:00 Done
Single
Thursday
Period 1 06:00-22:00
Period 2 00:00-00:00
Period 3 00:00-00:00 Done
Single
Friday
Period 1 06:00-22:00
Period 2 00:00-00:00
Period 3 00:00-00:00 Done
Single
Saturday
Period 1 06:00-22:00
Period 2 00:00-00:00
Period 3 00:00-00:00 Done
Single
Sunday
Period 1 06:00-22:00
Period 2 00:00-00:00
Period 3 00:00-00:00 Done
Single
Monday
Period 1 06:00-22:00
Period 2 00:00-00:00
Period 3 00:00-00:00 Done
Single
Monday
Period 1 06:00-22:00
Period 2 00:00-00:00
Period 3 00:00-00:00 Done
Multiple day timer is programmable for
Mon-Fri and Sat-Sun with 3 periods per
group of days:
Time clock
Single
Multiple
Multiple
Mon-Fri
Period 1 06:00-22:00
Period 2 00:00-00:00
Period 3 00:00-00:00 Done
Multiple
Sat-Sun
Period 1 06:00-22:00
Period 2 00:00-00:00
Period 3 00:00-00:00 Done
Multiple
Mon-Fri
Period 1 06:00-22:00
Period 2 00:00-00:00
Period 3 00:00-00:00 Done
Multiple
Mon-Fri
Period 1 06:00-22:00
Period 2 00:00-00:00
Period 3 00:00-00:00 Done
Once all days and times are set, select
'Done' to continue.
Holiday programme. Up to 8 holiday
periods can be set, each has a start and
end date. Once all are set select 'Done'
to continue:
Configure holiday prog?
No
Yes
Configure holiday prog?
No
Yes
Holidays
Period 1
Start 01/01/2000
End 01/01/2000
Done
Holidays
Period 1
Start 01/01/2000
End 01/01/2000
Done
Installation & Servicing