IDEAL EVOMAX 2 30 Installation And Servicing page 37

BOILER GUIDED CONFIGURATION STAND ALONE BOILER
Power up the boiler
Initailly the software revision of the
System Manager with be displayed in the
top LHS of the screen.
The following screens will then be
sequentially displayed:
< BRAND LOGO >
At start up the default language is
selected and shown on the display,
this can be changed if required or just
confirmed:
Language
English
Francais
Nederlands
Once the language is either confirmed or
selected then this is stored and set as the
default.
For a standalone boiler the controller
must be selected as a Master:
Controller
Slave
Master
Controller
Slave
Master
Initialize communication
Configure as master
Installation & Servicing
SECTION 2 - INSTALLATION
The system will then scan the bus to
determine if any other devices are
present:
Scan devices
Pairing devices
The current date followed by the time can
now be set:
Date
Year: 2018
Month: 7
Day: 4
Done
Date
Year: 2018
Month: 7
Day: 4
Done
Date
Year: 2018
Month: 7
Day: 4
Done
Date
Year: 2018
Month: 7
Day: 4
Done
Time
Hour: 0
Minute: 0
Auto su/wi time:
Done
Time
Hour: 0
Minute: 0
Auto su/wi time:
Done
Time
Hour: 0
Minute: 0
Auto su/wi time:
Done
Time
Hour: 0
Minute: 0
Auto su/wi time:
Done
The display will now prompt for selection of
the boiler number, this is necessary to identify
the boiler should it become part of a iCCS
(Commercial Control System), by default a
Master boiler will have a setting of 01:
Boiler ##
Done
Boiler 01
Done
Boiler 01
Done
The system will now scan the known
devices on the bus to determine what
Heating Circuits are available in the boiler
for configuration:
Once this is completed, the display will
prompt with the available heating circuits
so that they may have HC numbers
allocated, and then later configured.
HC ## Boiler 1.1
HC ## Boiler 1.2
Done
If any heating circuits are required for the

boiler, then number them sequentially
from 1. If there are no heating circuits to
be configured to this boiler just move on
past by selecting "Done". Examples:
Single Heating Circuit:

HC 01 Boiler 1.1
HC ## Boiler 1.2
Done

HC 01 Boiler 1.1
HC ## Boiler 1.2
Done

HC ## Boiler 1.2
Done
Set boiler number
Set boiler number
Set boiler number
Set HC number
Set HC number
Set HC number
Set HC number
37