Advertisement
Charging the appliance
Note: PowerUp rechargeable toothbrushes will not charge on the sanitiser
charger.
1
Put the plug of the charger in the electrical outlet.
2
Place the handle on the charger.
The battery charge indicator shows the approximate remaining
,
battery charge (Fig. 3).
-
Solid green light: 20-100%
-
Flashing green light: 5-19%
-
Flashing green light and 3 beeps after the brushing cycle: less than 5%
and toothbrush has to be recharged.
Note: To keep the battery fully charged at all times, you may keep your Sonicare
on the charger when not in use. It takes at least 24 hours to fully charge the
battery.
Using the appliance
1
Wet the bristles and apply a small amount of toothpaste.
2
Place the toothbrush bristles against the teeth at a slight angle
towards the gumline (Fig. 4).
3
Press the power on/off button to switch on the Sonicare.
4
Apply light pressure to maximise Sonicare's effectiveness and let
the Sonicare toothbrush do the brushing for you. Do not scrub.
5
Gently move the brush head slowly across the teeth in a small back
and forth motion so the longer bristles reach between your teeth.
Continue this motion throughout the brushing cycle.
Note: To make sure you brush evenly throughout the mouth, divide your
mouth into 4 sections using the Quadpacer feature (see chapter 'Features').
6
Brush each section for 30 seconds. Begin brushing in section 1
(outside top teeth) and then brush section 2 (inside top teeth).
Continue with section 3 (outside bottom teeth) and finally brush
section 4 (inside bottom teeth). (Fig. 5)
ENGLISH
9
Advertisement
