Download Print this page

Philips EasyClean Manual page 10

Hide thumbs Also See for EasyClean:

Advertisement

ENGLISH
10
7
After you have completed the 2-minute brushing cycle, you can
spend additional time brushing the chewing surfaces of your teeth
and areas where staining occurs. You may also brush your tongue,
with the toothbrush switched on or off, as you prefer (Fig. 6).
Your Sonicare is safe to use on:
-
Braces (brush heads wear out sooner when used on braces)
-
Dental restorations (fillings, crowns, veneers)
Note: When the Sonicare is used in clinical studies, the handle should be fully
charged. Deactivate the Easy-start feature and for areas where excess staining
occurs, an additional 30 seconds of brushing time can be spent to assist with
stain removal.
Features
Easy-start
This Sonicare model comes with the Easy-start feature activated.
The Easy-start feature gently increases the power over the first
14 brushings.
Note: Each of the first 14 brushings must be at least 1 minute in length
to advance through the Easy-start ramp-up cycle properly.
Deactivating or activating the Easy-start feature
1
Attach the brush head to the handle.
2
Place the handle in the plugged-in charger.
-
To deactivate Easy-start:
Press and hold the power on/off button for 2 seconds. You hear 1 beep
to indicate that the Easy-start feature has been deactivated.
-
To activate Easy-start:
Press and hold the power on/off button for 2 seconds. You hear 2 beeps
to indicate that the Easy-start feature has been activated.
Note: Using the Easy-start feature beyond the initial ramp-up period is not
recommended and reduces Sonicare's effectiveness in removing plaque.

Advertisement

loading