Download Print this page

Philips EasyClean Manual page 12

Hide thumbs Also See for EasyClean:

Advertisement

ENGLISH
12
5
Close the door and press the green power on/off button once to
select the UV clean cycle.
Note: You can only switch on the sanitiser if the door is properly closed.
Note: The sanitiser stops if you open the door during the sanitising cycle.
Note: The sanitiser cycle runs for 10 minutes and then automatically switches off.
The sanitiser is in operation when the light glows through the window.
,
Cleaning
Do not clean the brush head, handle and the UV sanitiser in the
dishwasher.
Toothbrush handle
1
Remove the brush head and rinse the metal shaft area with warm
water (Fig. 10).
Do not push on the rubber seal on the metal shaft with sharp objects,
as this may cause damage.
2
Use a damp cloth to wipe the entire surface of the handle.
Brush head
1
Rinse the brush head and bristles after each use (Fig. 11).
2
Remove the brush head from the handle and rinse the brush head
connection at least once a week with warm water.
UV sanitiser (specific types only)
Do not immerse the sanitiser in water or rinse it under the tap.
Do not clean the sanitiser when the UV light bulb is hot.
For optimal effectiveness, it is recommended to clean your sanitiser weekly.
1
Unplug the sanitiser.
2
Pull the drip tray straight out. Rinse the drip tray and wipe it clean
with a damp cloth (Fig. 12).

Advertisement

loading