Application Examples; Conventional Method; Position Control Terminal Block - Omron XW2B-40J6-2B Connection Manual

WX2B

Application Examples

J REDUCE WIRING TO EXTERNAL SENSORS, SWITCHES AND POWER SUPPLY
Conventional Method Requires Major Wiring Effort.
Position Control Module
Connector on the
Position Control
Module side
All wires are connected to the Position Control Terminal Block with ease.
Position Control Module
• Relays control signals between the Servo Driver and the Position Control
Module with minimal wiring effort.
• Connectors are wired with a single screwdriver and no soldering is required.
• Dedicated Cable connects Units.
The connectors are soldered.
Power
supply
Switch/Sensor

Position Control Terminal Block

Servo Control Screw
Terminal Block
Power
supply
Switch/Sensor
WX2B
Servo Driver
Connector on the
Servo Driver side
Servo Driver
3