Advertisement
WX2B
Application Examples
J REDUCE WIRING TO EXTERNAL SENSORS, SWITCHES AND POWER SUPPLY
Position Control Module
All wires are connected to the Position Control Terminal Block with ease.
Position Control Module
Downloaded from
Elcodis.com
electronic components distributor
Conventional Method Requires Major Wiring Effort.
The connectors are soldered.
Connector on the
Position Control
Module side
Power
supply
Position Control Terminal Block
• Relays control signals between the Servo Driver and the Position Control
Module with minimal wiring effort.
• Connectors are wired with a single screwdriver and no soldering is required.
• Dedicated Cable connects Units.
Switch/Sensor
Servo Control Screw
Terminal Block
Power
supply
Switch/Sensor
WX2B
Servo Driver
Connector on the
Servo Driver side
Servo Driver
3
Advertisement
