Drive Diagnostics Via Keypad/Bus System - Lenze 8400 Reference Manual

9 Diagnostics & error management
9.4

Drive diagnostics via keypad/bus system

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
9.4 Drive diagnostics via keypad/bus system
Keypad display of the inverter status
Symbol













Lenze · 8400 StateLine · Reference manual · DMS 16.1 EN · 10/2019 · TD06
• If the keypad on the front of the inverter is connected to the
diagnostic interface X6, the status of the inverter is shown via
different icons on the LCD display in the area .
Meaning
Inverter is switched on.
Inverter is enabled.
Application in the inverter is stopped.
Quick stop active
Inverter is inhibited.
Inverter is ready to start.
Speed controller 1 at the limit.
Set current limit has been exceeded in motor
or generator mode.
Pulse inhibit active
Fault
Trouble
TroubleQSP
Warning is active
Notes
SwitchedOn ( 94)
The power outputs are inhibited.
ReadyToSwitchOn ( 93)
The drive is torque-controlled.
The power outputs are inhibited.
Fault ( 98)
Trouble ( 97)
TroubleQSP ( 96)
440