Other Features; Adjusting Loudspeaker Volume - Philips SKM7489NC/00 User Manual

Using your baby monitor
EN

Other features

10
3 Press and hold the On/Off button (y) (B-6) on the parent
unit for 2 seconds.
> The sound level lights (B-9) briefly light up orange.
> The display (B-8) lights up.The battery indicator (
the room temperature light up in the display.
> The LINK light (B-3) lights up red briefly then starts
blinking green as it is seeking connection with the baby
unit.
> The LINK light (B-3) on the parent unit blinks green and
the LINK light (A-3) on the baby unit blinks red until
connection has been established.This will take up to
30 seconds. Both LINK lights (A-3, B-3) then light
continously green and the message Not LinKed will
disappear from the baby unit display (A-11).
4 Position the baby unit at least 1 meter / 3 feet away from
your baby.
5 Position the parent unit at the desired place within the
operating range of the baby unit but at least 1 meter / 3 feet
away from the baby unit.
For more information on the operating range see 'Technical
specifications'.
You can now monitor your baby!

Adjusting loudspeaker volume

• Briefly press the volume + and – buttons (A-4) on the baby
unit repeatedly until the desired loudspeaker volume for the
baby unit has been reached.
• Briefly press the volume + and – buttons (B-10) on the
parent unit repeatedly until the desired loudspeaker volume
for the parent unit has been reached.
) and