Paging The Parent Unit; Operating Range - Philips SBCSC478/00 Instructions For Use Manual

Philips dect baby monitor sbcsc478
Hide thumbs Also See for SBCSC478/00:
Table of Contents

Advertisement

SC478_book.qxd 06-07-2004 09:46 Pagina 12
ENGLISH
12
Switching the night lights on and off
• Press the
button (2) on the Baby Unit to switch on the night lights.
• Press the
button again to switch off the night lights.
> The nightlights dim and gradually switches off.
Note: Switch off the night lights when operating the Baby Unit on batteries to
conserve power.

Paging the Parent Unit

If the Parent Unit is misplaced and the volume is switched off, you can use
the Page button on the Baby Unit to locate the Parent Unit.
• Press the page button (1) on the Baby Unit.
> The Parent Unit will automatically reset to medium volume level and
paging alert will sound.
• To stop the paging alert, press the Page button again or any button on
the Parent Unit.

Operating range

• The SBC SC478 baby monitor has an open air operating range of up to
300 metres.Walls, ceilings, large objects and even glass will decrease the
operating range. Depending on your local circumstances the operating
range can decrease down to approximately 50 metres.The system check
function (lights 4, 15 and beeping sound on the Parent unit) will in
principle indicate to you the reliability of the connection between the
Parent unit and Baby unit and whether you are out of range.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sbcsc478

Table of Contents