Page 1
SC486_book.qxd 23-09-2004 18:22 Pagina 1 baby monitor SC486 DECT Instructions for use English 4 Instructions pour l’utilisation Français 18 Modo de empleo Español 32 Bedienungsanleitung Deutsch 46 Gebruiksaanwijzing Nederlands 60 Istruzioni per l’uso Italiano 74 Instruções de uso Português 88 Bruksanvisning Svenska 116 Vejledning...
ENGLISH Your baby monitor SBC SC486 Philips is dedicated to producing caring, reliable products that new moms and dads really need. Products whose reliability and operating quality bring reassurance.You can trust this Philips baby monitor to provide round-the- clock support by ensuring you can always hear your baby clearly, no matter where you are in the house.The 100% Digital DECT 'cordless telephone...
SC486_book.qxd 23-09-2004 18:22 Pagina 5 Environmental information No unnecessary packaging material has been used. We have tried to make the packaging easy to separate into two mono-materials cardboard (box), and polyethylene. Please observe the local regulations regarding the diposal of packing materials, exhausted batteries and old equipment.
Page 6
SC486_book.qxd 23-09-2004 18:22 Pagina 6 ENGLISH B) Parent Unit 17 TALK button 18 Volume Up/Down buttons ( 19 Display informs you on the present status of the Baby Unit 20 MENU button 21 DECT SYSTEM LINK light 22 Charging base 23 Charging light 24 Loudspeaker 25 OK button...
2 Insert four 1.5V, AA size batteries noting the + and - configuration inside the battery compartment. (The batteries are not included; we recommend non-rechargeable Philips Alkaline batteries). > When rechargeable batteries are used in the Baby Unit, these will be 3 Put the battery compartment cover back in place.
SC486_book.qxd 23-09-2004 18:22 Pagina 8 ENGLISH Parent Unit 1 Remove the battery compartment cover (29) by lifting the cover outward from the bottom. 2 Insert the two enclosed AA rechargeable batteries, noting the + and - configuration inside the battery compartment. 3 Put the battery compartment cover back in place.
SC486_book.qxd 23-09-2004 18:22 Pagina 9 Beltclip Connecting to the Parent Unit 1 Slide the wider side of the clip into the small rectangular recess on the back of the Parent Unit. Make sure the pins on the underside are above the circular recess. 2 Press the clip downwards until it clicks in position.
SC486_book.qxd 23-09-2004 18:22 Pagina 10 ENGLISH Adjusting loudspeaker volume • Use the loudspeaker volume of the Parent Unit. • Use the loudspeaker volume of the Baby Unit. > The displays give visual feedback on the volume settings on the units: Notes: –...
SC486_book.qxd 23-09-2004 18:22 Pagina 11 Checking that the units have established a connection • Check that the DECT SYSTEM LINK light (21) on the Parent Unit lights continuously (green) to confirm that the connection between both units is reliable. > When losing the link it will take about 8 seconds before the system link Switching the night lights on and off •...
SC486_book.qxd 23-09-2004 18:22 Pagina 12 ENGLISH Playing lullabies 1 Press the five available lullabies. 2 Press the 9 / 2 button (10) to play the selected lullaby. > > If you select ‘Play All’, all lullabies will be played one after another 3 Press the 9 / 2 button (10) again to stop playback.
SC486_book.qxd 23-09-2004 18:22 Pagina 13 3 Press the OK button (25) to confirm your selection. 4 Use the the OK button (25) to confirm. > In some cases ‘Saved’ appears on the display to confirm that an 5 Press the MENU button (20) again to exit the menu. Menu options The options ‘Nightlight’...
SC486_book.qxd 23-09-2004 18:22 Pagina 14 ENGLISH Temperature Set a minimum and a maximum room temperature (‘Range’) which you think are convenient for your baby. Minimum temperature can be set between 10 °C and 19 °C; maximum temperature can be set between 22 °C and 30 °C.
SC486_book.qxd 23-09-2004 18:22 Pagina 15 Problem solving If a fault occurs, first check the points listed below. If you are unable to remedy a problem by following these hints, contact the helpline or consult your dealer. Under no circumstances should you try to repair the set yourself as this will invalidate the guarantee.
SC486_book.qxd 23-09-2004 18:22 Pagina 16 ENGLISH Technical specifications Power supply: Operating temperature: 0 °C to 40 °C Standard: Resetting to default factory settings Factory Initialisation mode With this mode both units can be reset to the default factory settings. Factory Initialisation can be used if problems occur which can not be solved by following the suggestions in chapter ‘Problem solving’.
SC486_book.qxd 23-09-2004 18:22 Pagina 17 2 When the lights on the unit light up, immediately press and hold the volume down button ( > The unit has now been reset to the default factory settings. Note: By executing the factory initialisation mode Parent Volume, Baby Volume Need Help? In case you have any questions about the SBC SC486, please contact our helpline for assistance! You can find the number in the list on page 2.
Page 18
6 meses de garantía para las pilas recargables 6 Monate Garantie auf wiederaufladbare Batterien 6 maanden garantie op oplaadbare batterijen Garanzia di 6 mesi sulle batterie ricaricabili www.philips.com This document is printed on chlorine free produced paper Data subject to change without notice Printed in China...