Table of Contents
Advertisement
SC486_book.qxd 23-09-2004 18:22 Pagina 13
3 Press the OK button (25) to confirm your selection.
+ –
4 Use the
buttons (18) to make adjustments and selections and press
+
the OK button (25) to confirm.
> In some cases 'Saved' appears on the display to confirm that an
adjustment has been stored.
5 Press the MENU button (20) again to exit the menu.
Menu options
The options 'Nightlight' and 'Lullaby' can be operated via the keys on the
sets as well as via the menu.The other options can only be operated via the
menu. Each change in the menu set-up requires to press the OK button
to confirm and to save the option.
Nightlight
Confirm 'Light On?' or 'Light Off?' to switch the nightlights on or off.
Lullaby
Confirm 'Play?' to replay the last played lullaby or 'Stop Lullaby?' to stop
playback.
+ –
It is also possible to select a lullaby from the Parent Unit.
After Play, the
buttons should be pressed, 'Select new' is stated on the
+
LCD screen, press OK to select the choice.
Sensitivity
Select the desired sensitivity level for the Baby Unit microphone:
'Sensitivity 9' = minimum level / lowest sensitivity;
'Sensitivity 9 9 9 9 9' = maximum level (continuous transmission) /
When set to maximum level (continuous transmission), the Baby Unit
monitors continuously and all sounds, regardless of level, can be heard on
the Parent Unit. Battery operating time may decrease to approximately
12 hours during continuous transmission.
You can only change the Baby Unit microphone sensitivity if the connection
between the Baby Unit and Parent Unit is established.
Sound Alert
Confirm 'Alert On?' or 'Alert 'Off '. If Sound Alert is switched on, the Parent
Unit beeps as soon as the second sound-level-light (25) lights red while the
volume is switched off.
highest sensitivity.
ENGLISH
13
Advertisement
Table of Contents
