User manual DRC69705E30G This product contains a low power PRECAUCIÓN Producto láser laser device. RADIACIÓN LÁSER INVISIBLE Clase 1 Este producto contiene un dispositivo EN CASO DE APERTURAY DESBLOQUEO DE CIERRE. EVITE láser de baja potencia. CUALQUIER EXPOSICIÓN AL RAYO...
Remote Control To Change Remote Battery Remove the plastic sheet 1. Open the battery door. before operating remote control. Using the Remote Control • Point the remote control at the REMOTE SENSOR located on the unit. • When there is a strong ambient light source, the perform ance of the infrared 2.
Control Reference Guide 1. VIDEO MODE Press to adjust brightness, contrast or screen size. 2. MENU Press to enter and exit the main DVD menu. This option works only if the DVD has a main menu. Press to navigate or to adjust settings in SETUP, GOTO and MEMORY mode.
Control Reference Guide DVD player 6. DC IN Jack Connect the car power adapter to this OPEN jack. Press to open the disc door. Hold the 7. To Monitor Jack front panel when open the disc door. Connect to monitor via the connection (previous) cable.
Power Supply Using the car power adapter The included 12V car power adapter allows the unit to be used with vehicles that have a 12V, negative ground electrical system. Caution continued protection against risk of fire, replace only with same type and rating of fuse.
Page 6
Connections Connect with the Monitor Connect the included Connection cable to the DVD Player. Connect to Game Controller (monitor only) Connect the game controller to the GAME IN jack in the monitor, opening game menu appears on the screen. To return to DVD mode, unplug the game controller from the monitor.
Using headphones/earphones Turn down the volume before connecting the headphones/earphones. Slowly raise the volume with the headphones on until you reach your desired volume. When headphones are connected, the speaker is automatically disabled. WARNING: Excessive sound pressure from earphones and headphones can cause hearing loss. Avoid listening to sound at excessive levels which could be harmful to your ears.
Placement Mounting in the vehicle Use the supplied mounting straps to install the DVD Player and the monitor on the back of the vehicle's headrests. Tightly wrap the mounting straps around the headrest. Mounting the DVD Player Mounting the Monitor SAFETY WARNING! •...
Unit Operation Turning the unit on 1. Slide the STANDBY / ON switch on the DVD player to the ON position. 2. The start-up picture will appear on the screens. 3. After use, slide the STANDBY / ON switch on the DVD player to STANDBY (power off). Playing a Disc - Basic Functions This owner’s manual explains the basic instructions for operating this unit.
Notes: • The DVD player mutes sound and subtitles during reverse and forward scan of DVDs. • The fast playback speed may differ depending on the disc. Skip (Forward / Reverse) • Press the NEXT button to advance titles, chapters/tracks. •...
Angle Selection Some DVDs contain scenes that have been shot from a number of different angles. For these discs, the same scene can be viewed from each of these different angles. 1. While you are playing a DVD with different angles recorded, press the ANGLE button to view the number of current angles available.
Repeat Playback You can play a specific DVD title or chapter repeatedly (title repeat, chapter repeat, A-B repeat). Repeating a Chapter 1. While the DVD is playing, press the REPEAT DISC button until the indicator displays on the screen. The current chapter is played repeatedly. Repeating a Title 2.
Locating a Desired Section Locating a Specific Chapter/Title If you know the chapter/title number for the chapter/title that you want to play, you can locate it by directly selecting that number. 1. Press the GOTO button. 2. Press the button to highlight chapter/title number, then press the button to select the chapter/title you want.
Viewing JPG Files This unit can play JPG files recorded on a CD-R or CD-ROM disc (CD-RW is not recommendable). Viewing JPG Files 1. Open the disc door. 2. Hold a JPEG file disc by its edges and gently push it onto the spindle with the label side facing up until you hear a “click”.
Programmable Memory You can combine your favorite titles/chapters and play them in the order you determine. 1. Press the MEMORY button while a DVD is playing. The following display appears. Clear: Delete all the input programs. Exit: Exit memory menu and return to normal playback.
Customizing the DVD Function Settings Language Setup 1. Press the SETUP button on the remote control in Language Menu stop mode (when disc is not playing). Player Menu 2. Press the button to select Language Menu. 3. Use the button to select the option (Player Menu, Audio, Subtitle or Disc Menu), then press button.
System Setup 1. Press the SETUP button on the remote control in stop mode (when disc is not playing). 2. Press the button to select System Menu. 3. Use the button to select the option (Tv Display or Default), then press the button.
Troubleshooting No power • Ensure the car power adaptor is connected. • Make sure that the unit is turned on. The remote control does not function • Make sure the infrared remote sensor is not blocked. • Make sure the plastic sheet has been removed from the remote control. •...
Maintenance Cleaning the Disc A defective or soiled disc inserted into the unit can cause sound to drop out during playback. Handle the disc by holding its inner and outer edges. • Do NOT touch the surface of the unlabeled side of the disc. •...