Remote Control
Remove the plastic sheet
before
operating
remote control.
Using the Remote Control
• Point the remote control at the REMOTE
SENSOR located on the unit.
• When there is a strong ambient light
source, the perform ance of the infrared
REMOTE
SENSOR may
causing unreliable operation.
Battery Replacement
When the battery becomes weak, the
operating distance of the remote control
will be greatly reduced and you will need to
replace the battery.
Note:
• If the remote control is not going to be
used for a long time, remove the battery to
avoid damage caused by battery leakage
corrosion.
• When discarding batteries, environmental
problems must be considered and local
rules or laws governing the disposal
of these batteries must be strictly
followed.
WARNING:
• Do not dispose of the battery in a fire or it
may leak and/or explode.
• Batteries should not be exposed to
excessive heat such as sunshine, fire or the
like.
CAUTION: Danger of explosion if battery is
incorrectly replaced. Replace only with the
same or equivalent type.
the
be degraded,
EN - 2
To Change Remote Battery
1. Open the battery door.
2. Insert one CR2025 (3V) size battery.