Troubleshooting - RCA DRC69705E30G User Manual

Troubleshooting

No power
• Ensure the car power adaptor is connected.
• Make sure that the unit is turned on.
The remote control does not function
• Make sure the infrared remote sensor is not blocked.
• Make sure the plastic sheet has been removed from the remote control.
• Point the remote directly at the infrared remote sensor on the unit.
• Replace the battery in the remote control with a new one.
No Sound or only a very low-level sound is heard
• The volume control is located on the side of the unit - please try adjusting this.
• The unit is in pause mode. Press the
• The unit is in fast-forward or fast-reverse mode. Press the
normal play mode.
• Make sure the AUDIO/VIDEO output connections are correct.
• The DTS DVD cannot be decoded to have speaker output.
• The unit is too hot, shut off the unit for 30 minutes to cool it down.
No picture
• The region number of the disc doesn't match the region number of this unit.
The picture is not clear
• Clean the disc.
• The disc is scratched.
• Adjust the LCD's brightness and contrast using the VIDEO MODE button on the remote
control.
Loud hum or noise is heard
• The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.
• Clean the disc.
The disc does not play
• There is no disc inside the unit ("No Disc" appears on the screen).
• Insert the disc correctly with the graphics facing up.
• Clean the disc.
• A non-NTSC disc has been inserted, or the disc region number does not match the
region number of the unit.
• Condensation may have formed inside the unit due to a sudden change in temperature.
Wait about an hour for it to clear and try again.
PLAY button to return to normal play mode.
EN - 18
PLAY button to return to