Control Functions; Operating Panel; Display; Menu - Grundfos BACMON Installation And Operating Instructions Manual

7. Control functions

7.1 Operating panel

Button Button name

[Home]

[OK]
[Service]
[Left]
[Right]
[Down]
[Up]
In this manual the button names are written in square brackets,
e.g. [Home].
The LEDs indicate alarms and warnings and the status of the
product. See section
8. Alarms and

7.2 Display

1

Status

2 BACMON Water Inlet
2016-04-25 16:20:07
3
Changing sample...
4
Last sample: 2016-04-25 16:09:54
Bacteria
57430 /ml
5
6
Non-bacteria
98338 /ml
7
Layout of display
Fig. 9
Pos. Description
1 Menu bar
Name of sample-taking point defined by the customer
2
and local date and time
3 Current status
Information area
• Besides the general data, this area displays the error
code of active alarms. If an alarm is active, this area is
4
displayed with a red background.
• If a warning is active, this area is displayed with a
yellow background.
5 Bacteria concentration
6 Date and time of latest sample
7 Non-bacteria concentration
Flow cell status. The colour changes according to
8 degree of fouling. See section
cell.
9 Indicates that connection to the modem is active.
10 Indicates that connection to the server is active.
Function
• To unlock the buttons, press
[Home] for 1 second.
• Press [Home] to return to
"Home" screen where status
and results are shown.
Press [OK] to select the line
that is highlighted and to enter
changed data.
Press [Service] to enter the
"Service" menu. The product
will stop taking samples.
Press [Return] to return from
the submenu to the menu.
Press [Right] to enter the
highlighted line.
Press [Down] or [Up] to select
the desired line in the display.
warnings.
Service Settings
Flow
cell
91 %
8
9
10
11.1.3 Replacing the flow

7.3 Menu

The menu consists of four tabs:
• "Home"
• "Status"
• "Service"
• "Settings" (only for Grundfos service specialists).
When you navigate between the different menu tabs, the product
is still collecting samples, except when you choose "Service".
Then the product will switch into service mode and stop taking
samples until you leave the "Service" menu.
In this manual the menu and submenu names are written in
quotation marks, e.g. "Home".
7.4 "Home"
Status
BACMON Water Inlet
2016-04-25 16:20:07
Changing sample...
Last sample: 2016-04-25 16:09:54
Bacteria
57430 /ml
Non-bacteria
98338 /ml
Fig. 10 "Home"
Press [Home] to get back to "Home" from another menu. [OK] is
highlighted. Press [OK] to confirm.
If you come from the "Service" menu, the product will start taking
samples again.
7.5 "Status"
Home Status
Last result...
View sensors...
Current alarms...
Current warnings...
Current water quality alarms...
Current water quality warnings...
Fig. 11 "Status"
Press [Right] to go from "Home" to "Status".
Press [Up] or [Down] to highlight the desired submenu and press
[OK] to enter it.
Service Settings
Flow
cell
91 %
Service Settings
7