Product Introduction; Intended Use; Identification; Product Overview - Grundfos BACMON Installation And Operating Instructions Manual

6. Product introduction

6.1 Intended use

The GRUNDFOS BACMON bacteria sensor is to be used for
analysis of water using a specially developed imaging technique.
The use of the product is in indoor, frost-free waterworks
buildings and pumping stations.
The product must not be used for any other purpose
than the one mentioned above. For other uses,
please contact Grundfos.

6.2 Identification

6.2.1 Nameplate
The nameplate is placed on the side of the product enclosure.
Nameplate
Fig. 3

6.3 Product overview

1
2
3
4
5
6
Product overview
Fig. 4
Pos. Description
1 Wireless GSM communication connection
2 Operating panel
3 Alarm and status LEDs
Water analysis cabinet
4
With reagentless, patented, 3D scanning optics
Hydraulic parts
5 There are product variants with different hydraulic
accessories. The figure is just an example.
6 Stand (accessory)
7 Control cabinet
8 Main switch
9 Extension antenna (accessory)
10 Front plate
9
8
7
10
5