Grundfos BACMON Installation And Operating Instructions Manual

Real-time bacteria monitoring

Advertisement

GRUNDFOS BACMON
Real-time bacteria monitoring
Installation and operating instructions
Other languages
http://net.grundfos.com/qr/i/98291299
GRUNDFOS INSTRUCTIONS

Advertisement

Table of Contents
loading

Summary of Contents for Grundfos BACMON

  • Page 1 GRUNDFOS INSTRUCTIONS GRUNDFOS BACMON Real-time bacteria monitoring Installation and operating instructions Other languages http://net.grundfos.com/qr/i/98291299...
  • Page 2: Table Of Contents

    The persons responsible for operation and daily maintenance of Control functions the product are referred to as "users" in this document. The users Operating panel must be trained on their tasks by the Grundfos service specialists Display during commissioning, or by the operating company in agreement Menu with Grundfos.
  • Page 3: Symbols Used In This Document

    If you need to transport the product after it was A red or grey circle with a diagonal bar, possibly with commissioned, contact a Grundfos service specialist. a black graphical symbol, indicates that an action must not be taken or must be stopped.
  • Page 4: Installing The Product

    4.1 Installation requirements The operating company is obliged to prepare the installation location according to the following requirements. Contact Grundfos if any of these requirements cannot be met. • The installation location must be free from vibrations. •...
  • Page 5: Product Introduction

    6. Product introduction 6.3 Product overview 6.1 Intended use The GRUNDFOS BACMON bacteria sensor is to be used for analysis of water using a specially developed imaging technique. The use of the product is in indoor, frost-free waterworks buildings and pumping stations.
  • Page 6: Product Variants And Components Overview

    6.4 Product variants and components overview There are several product variants with different additional hydraulic components: BACMON Pump Prefilter Suction See fig. variant module module filter ■ Optional. ■ See pos. 17 in fig. 7. ■ ■ Components overview, variant D Fig.
  • Page 7: Control Functions

    Function • "Service" • To unlock the buttons, press • "Settings" (only for Grundfos service specialists). [Home] for 1 second. When you navigate between the different menu tabs, the product [Home] • Press [Home] to return to is still collecting samples, except when you choose "Service".
  • Page 8 Some alarms may not be described in this manual, but they can help Grundfos service specialists find the error in the product, if needed. Details about selected alarm: Alarms can be cleared manually; warnings cannot be Flow cell fouling is too high cleared manually.
  • Page 9: Service

    7.6.1 "Configure flush time" Home Status Service Settings This function must be performed by a Grundfos service specialist. Bacteria concentration 7.6.2 "Flush flow cell" Use this function for product variants with prefilter module to fill the system again after servicing the prefilter.
  • Page 10: Alarms And Warnings

    Alarms can be cleared manually, either via the operating panel by hardware warning keeps reoccurring or if a critical fault occurs. the user, or via the water quality server interface by a Grundfos The user is notified and the product stops operating and goes into service specialists.
  • Page 11: Taking The Product Out Of Operation

    Wipe up spilled liquid immediately to avoid slipping If the latest water sample was not drinking water quality, contact a hazard. Grundfos service specialist to have him clean the product before storage. • For maintenance work, always use appropriate protective equipment.
  • Page 12 3. Pull out the old flow cell (3.1). water. 4. Clean your hands to avoid contamination of the new flow cell – Replace the filter screen, if necessary. Contact Grundfos to or the micro fibre cloth with fat, oil or dirt. order spare parts.
  • Page 13: Technical Data

    – Minimum: 2 bar. • With pump module (optional): Weight Description – Maximum: 2 bar [kg] – Minimum: 0 bar. BACMON bacteria sensor 20.38 Temperature of medium (non-condensing): Pump module (self-priming) 1.16 • Maximum: 40 °C Pump module with prefilter (self-priming) 1.40...
  • Page 15 Unit 1, Ground floor Telefax: +64-9-415 3250 Turkey «Порт» Siu Wai Industrial Centre GRUNDFOS POMPA San. ve Tic. Ltd. Sti. Тел.: +7 (375 17) 286 39 72/73 29-33 Wing Hong Street & Norway Gebze Organize Sanayi Bölgesi Факс: +7 (375 17) 286 39 71...
  • Page 16 98291299 0916 ECM: 1191741 www.grundfos.com...

Table of Contents