Entering Data In The Data Lock Mode; Clear The Data-Lock Code; Decimal Shift Feature - Raven SCS660M Installation & Service Manual

Enter the new 4-digit code within 15 seconds, or enter 0 to disable the Data-Lock feature.
5.
Press ENTER.
6.

Entering Data in the Data Lock Mode

Press the button of the variable to be edited.
1.
Press ENTER. A message prompting for the data-lock code will appear.
2.
Enter the data-lock code. If the code is correct, E will appear on the display.
3.
Enter the data to be changed as usual.
4.

Clear the Data-Lock Code

The Data-Lock feature may be disabled so that a data-lock code is not required in one of two ways. The code
can be changed to 0 as outlined in the "Change the Data Lock Code" on page 38, or the console can be reset,
clearing the data-lock code from the system.
Important:
All calibration values entered into the SCS 660 console will be lost and must be
reprogrammed.
To reset the console:
Turn the POWER ON/OFF switch to the OFF position.
1.
Press CE and hold while turning the POWER ON/OFF switch to the ON position.
2.

Decimal Shift Feature

Important:
When entering data for Rate 1 Cal and Rate 2 Cal, remember that 2 GPA [20 lit/ha] is entered
as 2.0 [20.0] when the decimal is unshifted, but is entered as 2.00 [20.00] when shifted.
The Decimal Shift feature is used to increase the system's accuracy at low application rates. The following
table illustrates how shifting the decimal point can increase the system's accuracy.
Rate Display
Rate Cal
Tank Volume
Total Area
Total Volume
Field Area
Field Volume
Vol/Minute
Area/Hour
Rate +/-
Low Tank Level
Low Vol/Min
Manual No. 016-0159-845
US
Unshifted Shift Unshifted
000.0 00.00 0000
000.0 00.00 0000
0000 000.0 0000
000.0 000.0 000.0
0000 000.0 0000
000.0 000.0 000.0
0000 000.0 0000
0000 000.0 0000
000.0 000.0 000.0
000.0 00.00 0000
0000 000.0 0000
0000 000.0 0000
Console Programming and Calibration
Metric
Shift Unshifted
000.0 00.00
000.0 00.00
000.0 000.0
000.0 0000
000.0 000.0
000.0 0000
000.0 000.0
000.0 000.0
000.0 0000
000.0 00.00
000.0 000.0
000.0 000.0
Turf
Shift
00.00
00.00
000.0
0000
000.0
0000
000.0
000.0
0000
00.00
000.0
000.0
39