Philips SKM7491NC/05 User Manual page 6

• Use only the AC adapters provided. Use of any other
adapters may damage the system. Plug the AC adapters into
standard household current only! To prevent entanglement
and overheating, do not use extension cords.
• Keep in mind that you are using public airwaves when you use
the baby cam. Sound and video may be broadcast to other
receiving devices. Conversations, even from rooms near the
camera unit, may be broadcast as well.
• To protect your privacy, always switch off the camera unit
when not in use.
• Danger of explosion if batteries are incorrectly replaced.
Replace only with the same or an equivalent type.
• Do not mix battery types (alkaline batteries with other
batteries).
• Remove batteries when the baby cam will not be used for a
long period of time.
• Do not mix old and new batteries.
• Do not recharge non-rechargeable batteries.This may cause a
fire.
• If the batteries are left in the units when they are powered
from the mains, check them for leakage every six months.
Camera unit (baby unit)
Tips for positioning the camera unit
• Never place the camera unit inside the baby's bed or playpen.
• Position the unit at least 1 meter (3 feet) away from your
baby.
• The unit can be mounted on a wall, or placed on a stable, flat
surface, such as a dresser or table top.
IMPORTANT!
Once you have selected a location for mounting the unit, test
reception before mounting the unit to the wall. If interference
or other problems occur, refer to chapter 'Troubleshooting'.
• To prevent entanglement, mount the unit only at locations
where its AC adapter cord is out of children's reach!
• To prevent entanglement and overheating, mount the unit
only in locations where the AC adapter cord can reach a
standard wall outlet.
• Mount the unit at a location where the camera lens is not
obstructed. Use the horizontal and vertical angle adjustment
options to aim the camera properly.
Getting your baby cam ready
Welcome
T
T
S
T
EN
7