Jumper Position; Standard Conformity - aerauliqa Quantum HR 100 Installation Manual

jUMPER POSITION

Integral jumper set in position A (Fig.21A) means "extract" mode.
Intergal jumper set in position B (Fig.21B) means "intake" mode.
The jumper position defines both the air-flow direction when the unit is activated for the first time (for the synchronisation) and the air-flow
direction of the free-cooling mode.
MAINTENANCE AND SERVICE
Maintenance can be carried out by the user as indicated at page 20.
Service must be perfmormed only by technically qualified personnel in accordance with local rules and regulations. Make sure that the mains
supply to the unit is disconnected (page 21).
Cleaning of the heat exchanger can be performed from outside as well.

STANDARD CONFORMITy

2014/35/EC Low Voltage Directive (LVD) and 2014/30/EC Electromagnetic Compatibility (EMC), in conformity with the following standards:
Electrical Safety EN60335-1(2008); EN 60335-2-80(2005); EN 60335-2-80/A2(2009)
Electromagnetic Compatibility EN 55014-1(2006)+A1+A2; EN 55014-2(1997)+A1(2001)+A2(2008)+IS1(2007), EN 61000-3-2(2006)+A1(200
9)+A2(2009); EN 61000-3-3(2008).
6