Maintenance; Checking The Print Head Nozzles - Epson Stylus Scan 2000 Manual

Maintenance

Checking the Print Head Nozzles

If you find that printouts and copies are unexpectedly faint or that
there are gaps (missing dots) in the printed image, you may be
able to identify the problem by checking the print head nozzles.
You can check the print head nozzles from your computer using
the Nozzle Check utility, or using the Stylus Scan's control panel.
Using the control panel buttons
Follow the steps below to check the print head nozzles using the
control panel buttons.
1. Make sure that A4 or Letter size paper is loaded in the paper
feeder.
2. If the EPSON Stylus Scan is on, press the P power button once
to turn it off.
3. Hold down the
button to turn on the Stylus Scan. Then release both buttons.
E
load/eject button and press the P power
128