NEO S-Series Library Service Manual
Replace the Library Controller
WARNING:
power cords while working with the library.
WARNUNG:
ziehen Sie stets den Netzstecker, bevor Sie an der Einheit arbeiten.
AVERTISSEMENT:
toujours les cordons électriques en travaillant avec l'appareil.
CAUTION:
precautions to prevent damage to micro-circuitry or static-sensitive devices.
Prepare the Unit
1. Verify that all host processes are idle.
2. Power off the library by depressing the power button on the front panel.
3. From the module containing the failed controller, unplug the AC power cables.
4. Remove the Ethernet cables and any USB device from the library controller being
replaced.
Remove the Library Controller
1. Loosen the two blue captive thumbscrews on the controller.
2. Using the thumbscrews, slowly remove the controller from the library.
3. Set aside the old controller for return to Overland.
Install the Library Controller
1. Position the new controller on the alignment rails.
10400666-005
To reduce the risk of electric shock or damage to equipment, always remove any
Um das Risiko eines elektrischen Schlags oder Schäden am Gerät zu vermeiden,
Pour réduire le risque de choc électrique ou endommagement de l'équipement, retirez
While working with the library, observe standard Electrostatic Discharge (ESD)
AC Plug
©2015-20 Overland-Tandberg
Replacing Parts
Controller
24
Need help?
Do you have a question about the NEO S Series and is the answer not in the manual?