Advertisement
LED Indication
Green
Red
Solid
Solid
Initializing
Blink
Off
RF is off
Alternate Blink
Check nearby RF condition
Solid
Off
RF power on
RF power on (Power reduced to perform
Solid
Blink
the range check function)
Edit Lock Function
The purpose of the EDIT lock function is to prevent inadvertent changes to, or modifications of, the transmitter's programming and/or settings. To prevent these
accidental changes, it is possible to temporarily disable the EDIT button.
How to Lock
1. The home screen is displayed.
2. Press the S1 button. "LOCK" is displayed and the EDIT dial is disabled.
Status
FUTABA CORPORATION
Makuhari Techno Garden Bldg., B6F 1-3 Nakase, Mihama-ku, Chiba 261-8555, Japan
R6014FS LED Indication
Green
Red
Off
Solid
Solid
Off
Blink
Off
Alternate Blink
How to Unlock
1. With the EDIT button locked, press the S1 button for approximately one
second. The EDIT button will be active once again.
2. Alternatively, it is possible to unlock the EDIT button by turning OFF the
transmitter's power.
Phone: (043) 296-5118 Facsimile: (043) 296-5124
4
Status
No signal received
Signal received, normal operation
Receiver is receiving signals but the ID is
unmatched
Unrecoverable error (EEPROM, etc.)
©FUTABA CORPORATION
2007, 12
(2)
Advertisement
