Completing The Installation - Fisher & Paykel WD7560P1 Installation Instructions Manual

2. Uncoil the power cord, remove and discard the plastic pin cover and plug into a wall socket.
3. Connect the appliance to an earthed outlet protected by a fuse of suitable capacity.
• Check the power cord for damage and make sure it is not squashed or twisted when installing the washer.
• Always remove the power cord from a socket by the plug, not by the cord.
• If you are using an extension cord or a portable electrical outlet device (eg multi-socket outlet
• Do not touch or operate the machine with wet hands or with bare-feet.
• A damaged power cord must be replaced by a Fisher & Paykel trained and supported service
• Do not operate this machine if it has been damaged during transport. Contact your Fisher &
Spare Parts
Available from your Fisher & Paykel dealer or a Fisher & Paykel trained and supported service technician.
Hose Inlet Long (2m)
Hose Inlet Large Bore
Drain Hose Extension (not suitable for attaching to a spigot)

Completing The Installation

Installation Test Cycle
Do this before you wash or dry any items in your washer dryer. This is to check that your washer
dryer is installed and functioning correctly prior to use.
1. Turn your washer dryer on by pressing the 'POWER' button.
2. Select the 'Quick Wash 30' cycle. Ensure the drum is empty and the door closed.
https://producthelp.fisherpaykel.com/au/Wash/Front_Loaders/Washer_Dryer_Combo/WD8560F1/User_Guide_WD8560F1/03...
box), ensure that it is positioned so that it does not come into contact with water or moisture.
FAILURE TO DO SO MAY RESULT IN DEATH OR ELECTRICAL SHOCK.
technician, in order to avoid a hazard. The appliance must not be operated until it is repaired, as
there is a risk of electric shock.
Paykel dealer or Fisher & Paykel trained and supported service technician.
Part No. 422680P
Part No. 426123P
Part No. 425627P
Updated: Sat, 15 Feb 2020 18:52:05 GMT
Powered by
9