Levelling The Machine - Fisher & Paykel WD7560P1 Installation Instructions Manual

Product Dimensions
Maximum Capacity
Wash capacity
Dry capacity
The exact height of your washer dryer is dependent on how far the feet are extended from the base
of the machine. The space where you install your washer dryer needs to be at least 40mm wider and
20mm deeper than its dimensions.
This machine must not be installed and operated on a plinth.

Levelling The Machine

It is IMPORTANT to level the machine to ensure good spin
performance, and to minimise noise, vibrations and wear and tear on
the washer dryer.
1. Before positioning the machine in its final position, check that
the machine is level, front to back and side to side.
2. Manoeuvre the product into its final position (we suggest a
minimum clearance of 20mm each side).
3. Use a spirit level to check that the machine is correctly level.
The washer dryer comes with four adjustable feet, wind all
four feet up or down until the dryer is correctly level. Place
the spirit level on top of your washer dryer in the following
places;
• left to right,
https://producthelp.fisherpaykel.com/au/Wash/Front_Loaders/Washer_Dryer_Combo/WD8560F1/User_Guide_WD8560F1/03...
WD7560P1 WD8060P1
(mm) (mm)
kg kg
7.5 7.0
4.0 4.0
Levelling the feet
Updated: Sat, 15 Feb 2020 18:52:05 GMT
WD8560F1
(mm)
kg
8.5
5.0
Powered by
5