3.2
JDSU T-BERD 6000A TCP Server setup
Use this procedure to set up a T-BERD 6000A as a TCP Server.
Step
Action
1.
Select Test
Details
For Electrical handoffs: In the Test menu at the top of the Results screen,
and select Ethernet>10/100/1000>Layer 4 TCP Wirespeed>
IPv4>Terminate.
For Optical Handoffs: In the Test menu at the top of the Results screen,
and select Ethernet>1GigE Optical>Layer 4 TCP Wirespeed>
IPv4>Terminate.
Technical Support
Systems Engineer
Dave.Baker@jdsu.com
tac@jdsu.com
Page 27 of 28
1 866 228-3762
321-243-0600