Maxxus OXFORD AXR Installation & Operating Manual page 9

Filling the Water Tank
Filling the Water Tank
Step 1:
Remove the tank cap (50)
Step 2:
Insert the funnel into the opening of the tank.
Step 3:
Fill the desired amount of water into the tank.
CAUTION:
Do not overfill above the maximum filling level of Level 6 and do not underfill the minimum filling level of Level 1.
This can lead to damages to your training device.
Step 4:
Add a water treatment tablet to the water in the tank.
Step 5:
Close the tank opening by replacing the cap (50).
Step 6:
Check that the cap (50) is fitted correctly and that the water level is being shown. Remove any traces of water
which may have been spilled on the device or on the floor whilst filling the tank.
Water
ENG
50
1 x water treatment
tablet
9