Lh(Low Heating); C/°F Conversion; Display Screen Brightness; Operating The Air Conditioner Without The Remote Control - LG D12NAK NSB Owner's Manual

ADVANCED FUNCTIONS
16

LH(Low heating)

The operation of the heating system to main-
tain a minimum indoor temperature and pre-
vent indoor objects from freezing in a situation
where there is no permanent resident, such
as vacation home.
|
1
Press to turn on the power.
f
2
Press repeatedly to select the heating
operation.
3
Press .
- is displayed on the display screen.
NOTE
!
•LH Key may be input only in heating oper-
ation mode (cannot input when it is off)
•When LH function is set, maintain oper-
ation mode and previous
temperature(Fan speed : high), and dis-
play desired temperature display as
"LH". (LH = Low heating)
•During LH operation, when LH, temper-
ature change, wind strength, operation
selection, or wind only Key is input, re-
turn to [heating / previous temperature /
previous wind amount].
•If Jet Key is pressed during LH opera-
tion, end LH function and immediately
execute power heating. (only for power
heating model)
•In case an error occurred, operation can be
interrupted for the protection of the product.
°C/°F Conversion
The unit converses from °C to °F or from °F
to °C if Room Temperature KEY
pressed for 5 seconds.

Display screen brightness

You can adjust the brightness of the indoor
unit display screen.
D
1
Press Turn on/off the Display screen.
NOTE
!
This function may not be supported,
depending on the model.
Operating the air conditioner
without the remote control
You can use the On/Off button of the indoor
unit to operate the air conditioner when the
remote control is unavailable. However, the
fan speed is set to high.
In case of turning On
1
Open the front panel.
- Lift up both sides of the cover slightly.
* The feature can be changed according to a
type of model.
2
Press the On/Off button.
* The feature can be changed according to
a type of model.
F
is
ON/OFF
button