Installation; Table 3-1 Weights Of Standard Versions - Siemens 1PH728 Operating Instructions Manual

Installation / Assembly

3.3 Installation

Table 3-1
Type
1PH7 284
1PH7 286
1PH7 288
Notice
If the motor is not immediately commissioned, then it should be stored in a dry room which is
free from vibration and shock.
Transporting motors with a rotor shipping brace
Motors with cylindrical-roller bearings have a rotor shipping brace (shaft block), in order to
prevent the bearings from becoming damaged during transportation/shipping.
• Only remove this brace before fitting the drive element.
Notice
Take other suitable measures to axially fix the rotor if the motor has to be transported
after you have fitted the drive element.
[ID: 322.01]
3.3 Installation
Instructions relevant to safety
Caution
The enclosure components of electric motors can become very hot (possibly > 100 °C). Do
not touch enclosure components while the motor is running or immediately after it has been
running.
Caution
When positioning temperature-sensitive components (wires etc.), make sure that they are
not in contact with the motor enclosure.
3-2
Weights of standard versions
Weight
Approx. 1.3 t
Approx. 1.5 t
Approx. 1.8 t
Siemens AG A5E00177602A
Operating Instructions V 2.0 1PH728