Figure 7-6
①
②
③
④
• Before you screw on the end shields, seal the gap ② with MARSTON HYLOMAR SQ32M
sealant.
Notice
Check the sealing elements fitted (e.g. at the terminal boxes) and replace them if they do
not provide an adequate seal.
Notice
Follow the manufacturer's application and safety instructions when using the sealant.
Siemens AG A5E00177602A
Operating Instructions V 2.0 1PH728
Sealing gap between enclosure and end shields
End shields
Sealing gap
Enclosure
Protective tube
Maintenance
7.3 Repair
7-15