Sd Card Slot - Axis C1004-E User Manual

AXIS C1004-E Network Cabinet Speaker
Specifications

SD card slot

NOTICE TICE
NO NO TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the
SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card
from the product's webpage before removal.
For SD card recommendations, see axis.com.
microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are
trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.
Buttons
Control button
The control button is used for:
• Calibrating the speaker test. Press and release the control button and a test tone is played.
• Resetting the product to factory default settings. See Reset to factory default settings on page 17.
Microphone disable switch
For location of the microphone disable switch, see Product overview on page 20.
The microphone disable switch is used to mechanically turn the microphone ON or OFF. The factory default setting for this switch
is ON.
Connectors
Network connector
RJ45 Ethernet connector with Power over Ethernet (PoE).
NOTICE TICE
NO NO TICE
The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall
be intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer's
instructions. For information about regulatory requirements, see the Installation Guide at www.axis.com.
21