Digital weight indicator and controller (112 pages)
Summary of Contents for Doran 7000
Page 1
Model 7000 Digital Scale Digital Weight Indicator Model 7000M OPERATOR MANUAL DORAN SCALES INC. 1315 PARAMOUNT PKWY. 1-800-262-6844 FAX: (630) 879-0073 http://www.doranscales.com Made in USA...
Page 2
This scale uses state of the art technology to provide you with a low cost solution to the most demanding weighing applications. With ease of use and setup in mind, the scale is simple to set up and ready to use. The Model 7000, 7000XL, 8000XL offers many features. A few of these features are listed below: NTEP certification for Class III installations to 10,000d (CoC 99-129).
Page 3
Fig. 1: Model 7000 Front Panel Layout Model 7000: The Model 7000 (Fig. 1) controls consist of the ZERO and optional UNITS buttons located under the main display. A six-digit LED display is used to provide weight indications, negative polarity (except lb/oz) and operator messages describing scale operation.
Page 4
Scale units are displayed on four annunciators located to the right of the main display. Power Up: Connect the Model 7000, 7000XL to a compatible power source. With the 8000XL, press and release ZERO to turn on scale.
Page 5
Be sure the AC power is not excessively noisy - this can occur if large inductive loads, such as solenoids or motors, are on the same power line. The Model 7000, 7000XL, 8000XL has a filtered power supply to reduce the effects of normal line noise, but they cannot limit severe fluctuations.
Page 6
PRINT button. The current weight will then be transmitted to the printer. The 7000XL, 8000XL, and 7000(optional) has a "Print on Demand" feature which stores a PRINT request until the scale is stable. Once stable, the scale transmits the current weight.
Need help?
Do you have a question about the 7000 and is the answer not in the manual?
Questions and answers