Lenovo 1723-8BX Installation And Maintenance Manual page 47

d. Grasp both sides of the console unit and pull it completely out of the rack
e. Place the console unit on a table or other flat surface.
Step 6. To close the extended rails, press up on the release latch
rack so that it is fully closed
Step 7. Remove the rear bracket of the outer slide-rail from the rack by pulling the blue tab out
move the end of the slide-rail away from the rack flange and toward the center of the rack
Release latch
2 .
Release latch
2
.
1 and push the extended rail toward the
.
Chapter 4 Hardware maintenance information
1 while you
2
.
37