Step 7.
Press in both release latches
1
; then, grasp both sides of the console unit and push it completely
into the rack
2
. There will be resistance initially as the inner and outer rails are aligned. Pull the
console unit out halfway, and then push it back in to seat the console unit in the rails. Do this a few
times until the console unit moves smoothly in the rails.
Note: The release latches are self-releasing detents (mechanisms), once the rails are seated
properly. The release latches can be used for placement of the unit; but, are not required unless
removing the unit from the rack.
Release latch
Release latch
Attention: Make sure that you read the next page for information about installing the LCD tray.
.
11
Chapter 2
Installing the console unit in the rack