Lenovo 1723-8BX Installation And Maintenance Manual page 41

Step 8. Hold the new keyboard near the keyboard tray and carefully route the keyboard-and-mouse cable
down through the keyboard tray cutout and up through the cutout that is behind the flat-panel
display. (See the following illustration.) Carefully pull the cable through the cutouts.
Step 9. Place the keyboard in the tray and exert a small amount of pressure on the keyboard to secure it to
the double-sided tape on the front of the console tray.
Step 10. Close the flat-panel display.
Step 11. If you removed the console unit from the rack, go to "Installing the console unit in the rack" on page
46 to complete the procedure.
Attention: When you route the keyboard-and-mouse cable, make sure that the cable does not
hang below the underside of the keyboard where it might be damaged if it interferes with the
devices in the rack space below the console unit.
Step 12. Route the keyboard-and-mouse cable along the cable-management arm, securing the cable with
the hook-and-loop fastener strips.
.
Chapter 4 Hardware maintenance information
31