Advertisement
11‐ Operation
"Contains FCC ID: WCH99956085W".
Proceed to WiFi pairing on your Smartphone.
The Smartphone identifies the robot and initiates a pairing sequence.
Now the strong signal transmitter communicates remotely with the power supply via Bluetooth
12‐ OEM INTEGRATION INSTRUCTIONS
This module is intended only for Maytronic's devices under the following conditions:
The module is installed in the host equipment such that 20 cm is maintained between the antenna and users,
and the transmitter module may not be co‐located with any other transmitter or antenna unless evaluated
using the FCC multi‐transmitter procedures. The module shall be only used with the internal on‐board antenna
that has been originally tested and certified with this module. External antennas are not supported. As long as
these 3 conditions above are met, further transmitter test will not be required.
Maytronics is responsible for testing the end‐product for any additional compliance requirements required
with this module installed.
3
®
.
Advertisement
