Table of Contents
Advertisement
5
Switch the appliance ON by selecting the
desired speed.
Depending on your skin type, Speed I or Speed II
may be used to exfoliate. We recommend you
start using Speed I and if a more intense
exfoliation is desired, use Speed II.
6
Place the exfoliating head onto your leg
and move the appliance slowly and
smoothly over the leg skin.
After exfoliating, you may apply cream or lotion
to the legs.
Cleaning
Do not use any corrosive detergents, scouring
pads or cloths, petrol, acetone etc to clean any
part of this appliance.
◗
Keep the appliance, plug and cord away
from water.
Cleaning the Epilator Head
◗
Never clean, remove or replace the epilator
head when the appliance is on.
◗
It is essential for hygienic reasons that the
epilator head is cleaned after each use.
◗
Do not apply pressure or touch rotating
disc with hard objects as this may dent or
damage the discs. If damage occurs,
discontinue use immediately.
1
Switch the appliance OFF by setting the
switch to 'O' and remove the plug from
the outlet (Fig 7).
2
Remove the skin cooler.
3
Slide the protective sleeve off the skin
cooler(Fig 3).
4
Clean the appliance, skin cooler and
protective sleeve with a moist cloth.
5
Clean the pivoting cooling head of the
skin cooler with a brush or moist cloth after
each use (Fig. 11).
Make sure the outside of the skin cooler is
completely dry before you put it in the provided
protective cassette. Return the protective
cassette, with the skin cooler inside, to the freezer.
6
Remove the epilating head. Press the
ribbed sections and slide the epilating head
off the appliance in the direction of the
arrow (Fig. 12).
7
Clean all accessible parts and the epilating
discs with the brush (Fig. 13).
Never try to detach the epilating discs from the
appliance.
8
Slide the epilating head back onto the
appliance against the direction of the
arrow (Fig.14).
The epilating head only fits onto the appliance in
one way.
Advertisement
Table of Contents
