Table of Contents
Advertisement
Cleaning the Shaving Head
◗
Never clean, remove or replace the shaving
head when the appliance is on.
◗
The shaving head should be cleaned after
each use.
◗
It is recommended to replace the shaving
foil and cutter block once a year.
◗
Do not apply pressure or touch shaving
head with hard objects as this may dent or
damage foil or trimmers.
◗
Never use appliance with a damaged or
broken foil.
1
Make sure the appliance is switched Off
and unplugged.
2
Remove the shaving foil.
3
Clean the hair chamber and the cutter
block with the brush (Fig. 15).
To avoid damaging the shaving foil, do not exert
any pressure when cleaning.
4
For best shaving performance, it is
suggested to lightly oil shaving head
twice a year by spreading a drop of
mineral oil over the foil and the trimmers.
Replacement parts may be purchased on the
Norelco website, www.norelco.com
Cleaning the Exfoliating Head
◗
Never clean, remove or replace exfoliating
head when the appliance is On.
◗
It is essential for hygienic reasons that the
exfoliating head is cleaned after each use.
1
Make sure the appliance is turned Off
and unplugged.
Advertisement
Table of Contents
