Table Of Contents; Symbols Used In This Document; General Description; Applications - Grundfos Sololift2 D-2 Installation And Operating Instructions Manual

English (GB) Installation and operating instructions
Original installation and operating instructions.
CONTENTS
1. Symbols used in this document
2. General description
3. Applications
4. Pumped liquids
5. Installation
6. Electrical connection
7. Service
7.1 Service documentation
7.2 Maintenance
7.3 Service instructions
8. Technical data
9. Fault finding
10. Disposal
Warning
Prior to installation, read these installation
and operating instructions. Installation and
operation must comply with local
regulations, EN 12056-4 and accepted
codes of good practice.
Warning
The use of this product requires
experience with and knowledge of the
product.
Persons with reduced physical, sensory or
mental capabilities must not use this
product, unless they are under supervision
or have been instructed in the use of the
product by a person responsible for their
safety.
Children must not use or play with this
product.
2

1. Symbols used in this document

Warning
Page
If these safety instructions are not
observed, it may result in personal injury.
2
2
If these safety instructions are not
2
Caution observed, it may result in malfunction or
damage to the equipment.
2
3
Notes or instructions that make the job
Note
3 easier and ensure safe operation.
3

2. General description

3
3
The D-2 is a small, compact automatic lifting station
4 suitable for pumping grey wastewater off places
where it cannot be led directly to the sewer by means
5
of a natural downward slope.
6
If you are away for a long period (e.g.
7
holidays) we recommend that you turn off
Caution
the water supply to the units served by the
lifting station.

3. Applications

The product is suitable for pumping grey wastewater
from showers, bidets and sinks.
The product must be fastened to the floor
Note
to prevent uplift and turning.

4. Pumped liquids

Grey wastewater up to 50 °C.
Ordinary liquids for cleaning of the appliances
connected. pH value: 4-10.
The product must not pump harsh
Caution chemicals or solvents. See the quick
guide.